+91 33 2221 9391 |info@alishanply.com
ALISHAN CRYSTAL PLY
USP : Made from 100% Burmese Gurjan, each of its veneer layer is treated with 100% Boric Borax solution and is glue line poisoned to ensure complete protection from insects.
Quality : IS 710 certified.
Promise : Lifetime guarantee with peace of mind for generations.
Rigor proof : Bonded with very high quality phenol formaldehyde synthetic resin of BWP grade and treated with right chemicals to offer maximum protection against termites.
Test Report [Agency: Indian Plywood Industries Research & Training Institute (IPIRTI)]
| Sl. No. | Test Prescribed | Prescribed Value | Alishan Crystal Result |
|---|---|---|---|
| 1. | Moisture content (%) | 5% - 15% | 9 % |
| 2. | Glue adhesion strength (in dry state) | Min. individual - 1100 N Average - 1350 N | 1420 1490 N |
| 3. | Adhesion of ply (knife test) | Minimum pass standard | Minimum pass standard |
| 4. | Resistance to water (after 72 hrs. boiling) | Minimum - 800 N Average - 1000 N |
1100 N 1200 N |
| 5. | Tensile strength N/mm 2 Along the grains Across the grains Sum of strength |
42 N 25 N 84.5 N |
57.3 N 55.8 N 113.1 N |
| 6. | Modulus of elasticity N/mm 2 Along the grains Across the grains |
7500 N 6700 N |
8836 N 8602 N |
| 7. | Modulus of rupture N/mm 2 Along the grains Across the grains |
Minimum - 45 N Average - 50 N Minimum - 27 N Average - 30 N |
48.0 N 55.6 N 46.8 N 54.0 N |
| 8. | Retention of preservative Chemicals (kg/m81-ccb type) |
Minimum - 12 Kg | 13.1 Kg |
